Academic pride comes in a variety of forms; a graduation photo, a framed diploma, or a special class ring. These little jewels are the gleaming, shiny sign that you made it through a school- so what to do when they’re no longer gleaming and shiny? Here’s the rundown on how to get class rings fixed.
Why Class Rings are Difficult to Fix
Class rings can be some of the trickiest pieces of jewelry to repair. Almost all class rings have incredibly intricate designs that may include engravings, enameling, and stones. This complexity also extends to rings that were created to indicate membership in certain organizations, such as professional rings, military rings, and other kinds of scholastic class rings.
The physical makeup of the ring can also limit your options when it comes to finding someone to repair the item. Many class rings are made out of tough materials such as stainless steel, tungsten, and commercially-limited alloys that may be specific to a particular manufacturer, such as Jostens. Siladium, for instance, is a particular stainless steel alloy that is used to make high school and college rings. Most jewelers cannot size it, but companies with manufacturing capabilities such as Quick Jewelry Repairs have the equipment to manipulate this type of metal.
Aside from their designs, even the option of sending the ring back to the original manufacturer can be troubling- many people opt to search for someone cheaper. The ring resizing cost for sending it back to Balfour, for example, is comparatively higher than a local jeweler’s price because they need to intake the ring and pass it along to the appropriate facility or department for the work.
The Process of Class Ring Repair
1. Evaluate
The first (and most important) thing a jeweler will do when receiving an item is to give it a thorough examination. Class rings require a lot of evaluation, since the complicated designs can also complicate the repair process. Below is a list of factors to take into account:
- Enameling: Enameling is the process that puts a hard, colored glaze on your ring. It’s a powdered glass mixture that’s “baked” onto the surface of the metal, and over time it can crack and fall off. When exposed to pressure or high heat, it can also melt off, making it difficult for the jeweler to retain the original design of the ring. Many class rings incorporate enamel into their designs to display school colors; Herff Jones rings will almost always contain enamel because they use it to highlight the carvings on the shoulders of the rings.
- Stones: The gems in your item can affect a number of things. Depending on how they’re set, that can severely limit the number of sizes a ring can go up or down in the sizing process. Missing or cracked stones have to be replaced, and in some situations the replacement stone may need custom cutting, as class rings can be quite creative with gem design.
- Metals: Most jewelers do not have the ability to work with stainless steel, which is a popular material for class rings. This is due to the notorious toughness of the metal; it requires special equipment and expertise in order to manipulate it.
Once the jeweler has taken all necessary notes on the ring’s design and materials, they will look at the work needed.
2. Resize, Repair and/or Restore
The repair work varies from ring to ring, but the most common repairs have to do with resizing or fixing the ring’s shank.
Class Ring Resizing
- Many class rings have a flat top, with corner-like “shoulders.” While this design is a classic and easily identifiable as an academic piece of jewelry, it also limits the sizing. If the ring is going up or down too many sizes, this table-like design may possibly become distorted or even collapse.
- Even the resizing process can cause issues. A ring is resized by cutting into the band, and either adding or removing material to size accordingly. The heat that needs to be applied to the metal during this process will melt off any enamel, and potentially burn any faux stones that are made out of plastic or glass.
- To prevent these situations from happening, the jeweler makes use of various techniques and equipment to minimize the heat used during the process, or reduce the area of exposure. He may opt to use a laser soldering machine, or unset any stones to reset them after the sizing process.
Class Ring Shank Repair
- Over time, the shank, or the back of the class ring, can thin out or break from wear and tear. This renders the ring completely unwearable.
- The repair work needed will depend on the extent of the damage. If there is a small crack or cut in the shank, the jeweler can simply solder it shut. If the shank is too thin or broken into pieces, it will require a shank replacement.
- A shank replacement is the process of replacing the shank with a new and thicker strip of matching material in order to create a solid, wearable band. The jeweler fuses the metal at the ends of the ring to make it uniform and even. While this gives the ring a brand new look and allows you to wear it again, it will remove any interior marks, like metal stamps or engravings.
3. Finishing
Once the heavy-duty work is finished, the ring is moved to finishing, such as polishing, cleaning, plating, and enameling.
Polishing
The repair process leaves behind rough and uneven patches of metal, as well as scratches from the jeweler’s tools. The polishing process can buff out all of these imperfections, and even create different looks, such as a matte finish.
Cleaning
After polishing, the jewelry must be cleaned, as the polishing and repair work leaves soot and other residue all over the ring. The ring is cleaned in an ultrasonic cleaner, which is a tank of water that blasts bubbles at the item to remove grime from the tiniest cracks.
Plating
Some class rings have details that are gold-plated, and the plating can wear off over time or during repair work. In order to fix the discoloration, the jeweler makes sure that the surface is properly prepared by the polisher before moving it to the plating process. Depending on the work needed, the entire piece is either submerged into a gold-plating tank, or touched up with a plating pen.
Enameling
The final touch; if enamel was part of the design, it may have been affected during the repair. The jeweler takes note of the original design by referring to a picture taken before work, and re-enamels the ring. The ring is then “baked” or “cured” in order to harden the enamel and fuse it to the surface of the class ring.
You’re all set to begin fixing up your own class ring!
Community Discussion
Questions, experiences, and expert answers from the QJR community.
I have my late husband’s class ring and my grandson is graduating from the same high school and I would like to have tis ring resized and initials and date engraved inside. Please advise..
I have a 1989 class ring and the stone is chipped bad can you replace stone
I have 1973 white gold class ring that needs to resized and replace the stone. Wanting to know if yall can do it and a estimate what it might cost.
Hi Garry, thank you for your inquiry! I’ve followed up directly regarding your class ring resizing and stone replacement 🙂
I have a 10k ring class ring c1960 with a broken stone (see photos). Can you remove/replace the stone and retain the castle emblem? Photos attached.
We should have no problem at all with this! I’ve followed up directly via email 🙂
I have a class ring I need size up from a 10.5 to an 11
No problem at all – you can submit this order here. Please let us know if you have any questions!
I have 2 SEC Football Championship rings from Auburn University that I received in 1983 and 1988. One is a silver alloy and the other a gold alloy, I assume. They both need re-enameling and resized up about 2 sizes. Can you provide me any information ? Pricing?
We should have no problem with these sizings and enameling repairs – I’ve followed up with next steps via email 😉
Hi I have a 2004 class ring from Saint Josephs University in Philadelphia, PA. It has SJU encrusted on the stone. The bottom part of the J has broken off the stone. Can this be repaired? Thank you Brill
Hi, Bill! We reached out via email to help you with your ring repair needs. 🙂
My brother died in 1975 before his class ring was delivered to him. My dad wore it for years but before he passed he gave it to me to give to my grandson who shares the same birth month. Are you able to change the year, school and side details for my grandson? plus it will need to be sized
Hi, Sara. We replied to your comment via email 🙂
I have an ring I purchased in 1975. Special order sheriff’s office ring. It’s like a class ring. It’s a very heavy ring. I can find no one to resize it. Can you help. It needs up sized
Hi, Tom! Resizing is something that we definitely offer. I sent you an email with further instructions for us to help you with your ring 🙂
My PGA golf lifetime ring (Men’s) is 20 years old. I received it in 2003. It is very similar to a school class ring. I would if possible like it sized a half larger and it appears to have plenty of room to do so. Can you help me on this please?
Thank you,
Noel
Thanks, Noel! We’ve responded to your comment via email. 🙂
I had to have my class ring cut off my finger when I was pregnant. Can it be fixed??
Hi, Dina. Thank you for your comment on our post! We reached out via email to help you get your ring fixed 🙂
My 1974 class ring needs to size up 1/2 size . 10k gold i think from 1974
Hi Tim, thank you so much for your comment! We’d love to help you size up your ring. We reached out via email with the next steps 🙂
sell class ring VT class 1966
I have a 1940’s pilot ring made by Jacobsen Sterling. The stone is cracked and needs to be replaced.
Hi Tere, thank you so much for commenting on our post 🙂 We’d love to help you with your ring. I reached out via email with the next possible steps!
Hi how can I have my 1991 class ring resized bigger?? Thank you
Hi Derick, Happy to help! We’ve reached out via email with further details.
I have a 1977 Berea High school ring that needs to be sized bigger and the stone replaced. Can you help?
Hi Daniel, we’d love to assist! I reached out via email to help you with the next steps. 🙂
My 1974 John Roberts Class ring has the center oval stone that has come out. Can this be repaired? the stone also has the medical emblem that is wearing. Can this be repaired or replaced. Can I get an estimate for repairs.
Hi Anthony, thanks for the comment! I reached out via email to help you with your class ring 🙂
I have grown since initially ordering my service ring. It needs to be enlarged by approx 1 size. Can this be done without damaging the settings and engravings?
Hi J.D, thank you so much for commenting! I’d love to assist you further. I reached out via email to help you out. 🙂
I have my 1967 Purdue U. class ring with an oval stone, and the ring is an open back. The ring is white gold. The stone has cracked and a small piece is now missing. The ring was made by John Roberts Co. John Roberts Co. said the stone could not be replaced and the 1967 Purdue U. casting is no longer available. Is there any possible repair available? Is there a product like a “jeweler’s glue” that could be applied to keep the stone from breaking/chipping any further?
Hi Terry! Thank you so much for commenting 🙂 We’d love to take a look at your ring. I reached out via email to help you out. 🙂
1971 John Roberts, Embry Riddle Collage Ring. Missing the recessed symbol(plane) in the stone. Is it repairable? Any help would be greatly appreciated.
Hi Dennis, thanks for commenting! We reached out via email to help you with your ring 😀
Showing 20 threads with 37 comments · page 3 of 4